Усилитель мощности 3 канала: 2x300 + 1x600(4), 2x220 + 400(8) AUDAC T2

Crossover on each channel Model Name / Type: T2 / Triple channel power amplifier RMS Power 8 ohms: 2 x 220 W + 400 W RMS Power 4 ohms: 2 x 300 W + 600 W THD+N: < 0.05 % Signal / Noise: > 93 dB Frequency Response: 20 Hz - 20kHz Power Supply: 240 V AC / 50 - 60 Hz Dimensions (W x H x D): 483 x 88 x 495 mm The T2 is a professional power amplifier which can deliver a power up to 2 x 300 Watt + 600 Watt 4 Ohm, and is suitable for most common low impedance high power sound systems. The T series are designed as no-nonsense amplifiers with only the necessary controls and connectors. This creates great simplicity in use and installation. They are built as 2 channel amplifi ers with an additional channel to power a passivesubwoofer cabinet. Each input is fi tted with a knob to set the cross-over frequency, with arange between 50Hz and 250Hz, to determine the signal for the subwoofer channel.They alsocontain a built-in limiter and a multipurpose protection circuit. The protection circuit detectsDC malfunction, short circuit, overheating, overload and limits the signal when necessary.On the front of the amplifi er, the volume of each channel can be set by an individual volumecontrol, along with the signal, clip and protection indicator LED’s. Each channel is fi tted with a balanced XLR input connector and a speakon output connector. The steel 19" housing has a height of 2 HE.